3 Series E46 316i (M43TU) SAL
Caution!
Before setting new spacer buffers,
remove remnants of old spacer buffers completely (broken
rear window).
Fit two spacer buffers at a distance (200 mm) from center of
cowl panel.
Cut nozzle to size.
(A) 7 mm
(B) 12
+1
mm
Note:
To apply uniform glue bead, use cartridge pistol, operated
with compressed air or electric power (refer to BMW Parts
Service).
Note expiry date of glue!
If applicable, produce a sample bead before gluing.
Cartridge must be arranged vertically against rear window.
Caution!
Version with rear window antenna:
No glue must come into contact with the connection contacts
of the rear window heating/antenna.
RA Removing and installing rear window
BMW AG - TIS
19.01.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
