3 Series E46 316i (M43TU) SAL
Shape of glue bead:
(A) 7 mm
(B) 12
+1
mm
Caution!
Apply glue bead quickly and insert window. Skin formation
time of glue, maximum 10 minutes.
Maintain distance (A), (B) and (C) between glue bead and seal.
(A) 2 mm
(B) 2 mm
(C) 8 mm
Note:
Adhesive area for plastic adhesive tapes must be free of
grease and dust.
Attach two yellow plastic adhesive tapes (Tesa)
to roof at a distance (250 mm) from outer corners.
Length: 400 mm
Width: 50 mm
Install rear window carefully using special tool 51 3 010. The
gasket must make uniform contact all round (center). Press rear
window upwards until gasket is at uniform distance from roof all
round.
Secure rear window in this position at top with two yellow plastic
adhesive tapes (Tesa).
Length: 400 mm
Width: 50 mm
Distance from outer corners approx. 100 mm.
RA Removing and installing rear window
BMW AG - TIS
19.01.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
