3 Series E46 316i (M43TU) SAL
Passenger side with removal opening (1):
Note:
Do not damage lining (2) when removing trim (3).
-
Carefully insert a regular screwdriver approx. 1 mm into
removal opening (1) of trim (3).
-
Press trim (3) forwards and lift out towards top.
Release screws (1).
Installation:
Screw (1) is longer than the others.
Tightening torque 51 21 6AZ.
Lever out trims (3), release screws underneath and screws (2).
Installation:
Tightening torque 51 41 2AZ.
Unclip clips (1) of door trim panel with special tool 00 9 317
(trim panel wedge).
Carefully unclip door trim panel (1) at top with special tool
00 9 317 (trim panel wedge).
Feed door trim panel (1) out of unlocking knob (2).
RA Removing and installing left or right front door trim panel
BMW AG - TIS
19.01.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
