3 Series E46 316i (M43TU) SAL
Unhook Bowden cable for release lever:
-
Tighten release lever (1).
-
Lever out lock (2).
-
Remove Bowden cable (3) towards rear/top.
Installation:
Press unlocking lever (1) for installation fully on door trim panel.
Version with additional speaker:
If necessary, disconnect plug connection (1) on additional speaker
(2).
Feed out wires (1) from opening (2).
Disconnect plug connections (3) and (4) and remove door trim
panel.
Installation:
Clips (1) are longer than the other clips.
Clips (1) are gray,
the other clips are white.
Fit all clips with sealing ring.
If necessary, replace faulty clips.
RA Removing and installing left or right front door trim panel
BMW AG - TIS
19.01.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
