3 Series E46 316i (M43TU) SAL
Solid trim:
Unclip solid trim (1) towards bottom and remove.
Split trim:
Unclip split trim (1) towards bottom and detach towards front.
Solid trim:
Installation:
Catches (1) and Velcro-type fasteners (2) on panel (3) must
not be damaged.
Split trim:
Installation:
If necessary, replace defective clips (1).
Catches (2) on trim (3) must not be damaged.
Version with interior light package:
If necessary, lever out inside lights on left/right side and
disconnect plug connection.
RA Removing and installing / replacing headliner (with slide/tilt sunroof)
BMW AG - TIS
19.01.2013 15:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
