3 Series E46 316i (M43TU) SAL
Release expansion rivet (1) at rear of headliner (2).
Release expansion rivet (1) and screw (2) at front of
headliner (3).
Remove mucket (1).
Installation:
The joint (2) is located above the driver's side.
Move both front seat backrests as far back as possible.
Press headliner (1) towards rear out of metal lugs (2) and remove
towards rear left door.
RA Removing and installing / replacing headliner (with slide/tilt sunroof)
BMW AG - TIS
19.01.2013 15:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
