3 Series E46 316i (M43TU) SAL
Secure lead (1) with 6 mm dia. butylene tape (2) (sourcing
reference: BMW Parts Service).
Note:
Leads (3) pass over sound insulation.
Lay 6 mm dia. butylene tape (sourcing reference: BMW Parts
Service) in specified adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
19.01.2013 15:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
