3 Series E46 316i (M43TU) SAL
64 11 220
Removing and installing/replacing resistor for
heater blower
Remove heater bulkhead,
refer to 51 71 080.
Release screws and lever out cover for blower impeller.
Release screw (1), disconnect plug connection (2) and lever out
blower resistor.
Installation:
First install resistor. Then insert plug connection.
RA Removing and installing/replacing resistor for heater blower
BMW AG - TIS
19.01.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
