3 Series E46 316i (M43TU) SAL
64 11 228
Replacing output stage/switch for heater - A/C
system blower
Remove air duct for right footwell.
Unhook linkage (2) in direction of arrow.
Release screw (1).
Installation:
Ensure that guide (3) is correctly seated.
Release screw (1).
Unhook holder for actuator drive (2).
Disconnect plug connection on actuator drive (3).
Disconnect plug connection (2).
Loosen screws (1).
Undo lock in direction of arrow and remove output stage/switch for
heater - A/C system blower (3).
Installation:
Ensure correct cable routing.
RA Replacing output stage/switch for heater - A/C system blower
BMW AG - TIS
19.01.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
