3 Series E46 316i (M43TU) SAL
Remove cover frame (1) in direction of arrow from headlight
housing (2).
Turn sidelamp bulb holder (2) in direction of arrow and remove.
Remove high beam cover (1) in direction of arrow.
Installation:
Make sure high beam cover is correctly seated.
All models except M3:
To install cover for high beam, if necessary release control unit
holder for xenon headlight.
Saloon/sedan, touring from 09/2001 only:
Disconnect plug connection (1).
All:
Press headlight insert (1) at an angle towards front/bottom until
inner headlight vertical aim adjuster (2) snaps audibly out of its
guide (3).
RA Removing and installing/replacing left headlight vertical aim adjuster (xenon he
BMW AG - TIS
19.01.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
