3 Series E46 316i (M43TU) SAL
Turn thumbwheel (1) clockwise until headlight insert (2) is free.
Tilt out headlight insert (2) in direction of arrow and feed out of
guide (3).
Remove headlight insert (2).
Installation:
Make sure headlight insert is correctly seated in guide (3).
Turn thumbwheel (1) approx. 10 turns counterclockwise.
Then clip headlight insert (2) onto ball socket of inner headlight
vertical aim adjuster.
Installation:
Insert guide (1) on headlight insert into rail (2) of headlight
housing.
If necessary, make sure pin (3) of adjusting lever for right/left-
hand traffic is correctly seated in bore (4).
Disconnect plug.
Release screws and remove headlight vertical aim adjuster.
Installation:
Adjust headlights.
RA Removing and installing/replacing left headlight vertical aim adjuster (xenon he
BMW AG - TIS
19.01.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
