3 Series E46 316i (M43TU) SAL
67 62 000
Removing and installing / replacing flat motor
for front left or right power window unit
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove front door trim
Note:
To remove the flat motor, it is necessary to detach the
acoustic insulation in the lower area only.
Lever out sealing bead (1) of acoustic insulation (2) with special
tool 00 9 317 .
Note:
Work with particular care in area (A) otherwise acoustic
insulation (2) will tear and must be replaced.
Unfasten plug connection (1) and disconnect.
Release screws (2).
Installation:
Tightening torque 67 62 1AZ
.
RA Removing and installing / replacing flat motor for front left or right power win
BMW AG - TIS
19.01.2013 17:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
