3 Series E46 316i (M43TU) SAL
Turn flat motor slightly and lift out in direction of arrow.
Note:
Make sure door window glass has not been fully moved
downwards.
Convertible from 09/2003:
Replacement:
A normalization must be carried out in order to activate anti-
trapping protection.
Operating sequence for normalization:
•
Open corresponding window completely.
•
Press corresponding power window switch into "Close one-
touch operation" (second switch stage).
•
Once the upper end position has been reached, hold power
window switch down for approx. 1 second more.
Normalization is thus completed.
Note:
Carry out function check (one-touch function, anti-trapping
protection and, if necessary, comfort function).
RA Removing and installing / replacing flat motor for front left or right power win
BMW AG - TIS
19.01.2013 17:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
