3 Series E46 316i (M43TU) SAL
67 65 511
Removing and installing or replacing drive for
sun roller blind
Panel for rear parcel shelf removed,
refer to 51 46 000.
Caution!
Do not power up the drive mechanism if it is not completely
connected to the system.
The linkage is subjected to spring pressure if the roller sun
blind is not fully rolled up.
In this case, maintain roller sun blind under pretension and
carefully lever out linkage. Now allow roller sun blind to roll up
slowly.
Unclip retaining clips (1) in direction of arrow and lever out linkage
on left and right.
Unclip cable (2). Release screws (1) and remove drive.
Installation instructions:
Attach screws (1) loosely only. Attach linkage and tighten
down screws (1).
RA Removing and installing or replacing drive for sun roller blind
BMW AG - TIS
19.01.2013 17:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
