3 Series E46 316i (M43TU) SAL
72 11 108
Removing and installing or replacing all rear
seat belts (complete, with retractor belt)
Note:
Remove rear shelf.
Unscrew screw.
Remove rear right lower strap (2) and middle lower strap (1).
Note:
The "CENTER" marking is located on the red release button
on the buckle of the lower strap in the middle!
Installation:
Fittings of rear right lower strap (4) and middle lower strap (3)
must rest against stop (1).
Installation position:
Rear right lower strap (4) is shorter and lies underneath
middle lower strap (3), which is longer.
Retaining screw (2) for rear right and middle lower straps.
Tightening torque,
refer to Technical Data 72 11 9AZ .
RA Removing and installing or replacing all rear seat belts (complete, with retract
BMW AG - TIS
19.01.2013 17:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -