3 Series E46 316i (M43TU) SAL
Screw connection for rear right and middle lower straps:
(1) Support ring (fitted to rear right lower strap)
(2) Anchor fitting, rear right lower strap
(3) Anchor fitting, middle lower strap
Installation:
Lug of support ring (1) must snap into opening in anchor fitting
of rear right lower strap (2) and engage in groove of anchor
fitting (3).
Unscrew screw.
Remove rear left lower strap (2) and middle lap belt strap (1).
Installation:
Fittings of rear left lower strap (4) and middle lap belt strap (3)
must rest against stop (1).
Installation position:
Rear left lower strap (4) lies underneath middle lap belt strap
(3).
Retaining screw (2) for rear left lower strap and middle lap belt
strap.
Tightening torque,
refer to Technical Data 72 11 9AZ
RA Removing and installing or replacing all rear seat belts (complete, with retract
BMW AG - TIS
19.01.2013 17:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
