3 Series E46 316i (N42) SAL
Open plug.
Installation:
Replace sealing ring.
Tightening torque 25 Nm.
Note:
Take care - screw can fall down very easily.
Remove lower screw of chain guide.
Remove upper screw of chain guide (1).
Note:
Chain guides (1 and 2) are locked in place with 4 lugs.
Carefully compress chain guide (2) and remove chain guide (1).
Installation:
Pull up timing chain and install chain guide (1).
RA Removing and installing/replacing inlet camshaft (N42/N46)
BMW AG - TIS
20.01.2013 18:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
