3 Series E46 316i (N42) SAL
Important!
Only release the 8 nuts shown in the illustration.
Clamp special tool 11 9 320 as illustrated in a vise.
Important!
Do not tilt bearing bracket (1).
Carefully lift out bearing bracket (1).
Do "not" remove rocker arm (1) on inlet side.
Important!
Rockers arms (1) are divided into individual tolerance
classes.
Used rocker arms (1) may only be reused in the same
position.
Deposit bearing bracket with inlet camshaft upwards in special
tool 11 9 320 .
RA Removing and installing/replacing exhaust camshaft (N42/N46)
BMW AG - TIS
20.01.2013 18:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -