3 Series E46 316ti (N42) COMP
Installation:
Push lock (3) into opening (2). Fold down oil separator (1) and
cable duct (4).
Screw special tool 11 9 380 onto grub screws (5) of oil
separator.
Insert special tool 11 9 380 through screw connection openings
on manifold.
Installation:
Draw oil separator (1) with special tool 11 9 380 near to
manifold.
Make sure oil separator is located in guide rails on manifold.
Unscrew special tool 11 9 380 and insert nut.
Unscrew second special tool 11 9 380 and insert second nut.
Tighten down both nuts.
RA Removing and installing intake manifold (N42/N46)
BMW AG - TIS
25.01.2013 14:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
