3 Series E46 318i (M43TU) TOUR
(B) Trim on rear lid, side outside:
Release trim on rear lid, top center,
refer to (A).
Release trim on rear lid, outside bottom,
refer to (B).
Lever out retainers (1) of trim (2) with special tool 00 9 317.
Lever out clips (1) of trim (2) with special tool 00 9 317.
Installation:
If necessary, replace faulty connector inserts (1).
Installation:
Following parts of trim (1) must not be damaged:
2
Mounts for swallow-tail guide
4
Clip mounts
5
Swallow-tail guide
If necessary, fit foam straps (3).
RA Removing and installing/replacing all trims for rear lid (Touring)
BMW AG - TIS
12.02.2013 01:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
