3 Series E46 320Ci (M54) CONVER
Plug/spot-weld and grind area (4).
Plug/spot-weld area (1).
In area (2), drill new parts including outer entrance for plug/spot-
welding and plut/spot-weld with base plate.
Drill area (1) on new part for plug-welding and weld with metal plate underneath.
Spot-weld area (2).
Clean new inner A-pillar reinforcement part (3) at connection
points and adjust to fit.
Spot-weld area (1).
Weld area (2) (seams).
RA Replacing door pillar outer and inner sections at front left (partial replacemen
BMW AG - TIS
12.02.2013 20:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -