3 Series E46 320Ci (M54) CONVER
Note:
For adjustment of distances (A) and (D) only:
Disconnect plug connection (1).
Unlock housing to gain access to screw (2).
Distance (A):
Remove rear body molding.
Tape off bore with adhesive tape (1) (damage to paintwork).
Slacken screw (2) through bore, turn clockwise with Torx E7.
Slacken nuts (2) and (3) with special tool
41 6 120 .
Move window lift with window (1) to adjust distance (A) at bottom
and tighten down nuts (2) and (3).
A
23 ... 25 mm
Slacken screws (1) with Torx T30.
Slacken nut with special tool 41 6 120 .
Turn window (2) to adjust distance (A) at top, tighten down
screws (1) and nut.
RA Adjusting rear left or right side windows
BMW AG - TIS
12.02.2013 22:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -