3 Series E46 320d (M47) SAL
E46 only:
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1) and remove lower section of microfilter
housing (2).
Note:
Screw (1) is not visible.
Release screws.
Remove acoustic cover at front.
Remove intake snorkel.
Unclip hoses, remove hose holder (1).
RA Removing and installing, sealing or replacing oil sump (M47)
BMW AG - TIS
12.02.2013 12:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -