3 Series E46 320d (M47) SAL
Detach rubber strip (1).
Release locks (2) and remove side trim panel.
E39 only:
Release screws.
Withdraw snorkel (1) from corrugated tube (2) and remove.
Release screws.
Remove acoustic cover (1).
E46 and E39:
Assemble special tool 00 0 200 with special tool 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and install.
Secure special tool 00 0 200 to front engine suspension eye.
Note:
The supports (1) of special tool 00 0 208 must rest on the bolt
connection of both side walls.
RA Removing and installing, sealing or replacing oil sump (M47)
BMW AG - TIS
12.02.2013 12:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
