3 Series E46 320d (M47) SAL
Caution!
Do not turn the connecting rods or crankshaft.
Use conrod bolts to check conrod bearing clearance.
Tighten down conrod bolts with special tool 00 9 120 or special
tool 11 2 110
Tightening torque, 11 24 1AZ .
Remove bearing cap. Read off bearing clearance at width of
crushed plastic thread with aid of measuring scale.
Conrod bearing clearance.
Remove plastic thread.
Summary:
Color code / shaft diameter / bearing strength
rt = red
bl = blue
1.
Crankpin
2.
Bearing clearance
3.
Bearing shells: red or blue
4.
Conrod
RA Replacing all conrod bearings (M47 / M47TU)
BMW AG - TIS
12.02.2013 12:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
