3 Series E46 320d (M47) SAL
Check housing and cover for signs of wear and fretting corrosion.
Installation:
Bevel on outer rotor points towards housing.
Press sleeve downwards gently using suitable mandrel.
Caution!
Strong spring force.
Lift out retaining ring and remove pressure valve.
Installation:
1.
Piston
2.
Spring
3.
Sleeve
4.
Check O-ring, replace if necessary.
5.
Circlip
RA Installing and removing or replacing oil pump (M47)
BMW AG - TIS
12.02.2013 13:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -