3 Series E46 320d (M47) SAL
Release screws (1) on EGR cooler.
Installation:
Clean sealing faces.
Replace seal.
Release bracket on EGR cooler.
Drain off and top up coolant.
Vent cooling system and check for leaks.
Pull lock and detach coolant hose (2).
Installation:
Refer to general instructions for work on cooling system.
Release hose clamp (1) and detach coolant hose.
RA Removing and installing/replacing EGR cooler (M47)
BMW AG - TIS
12.02.2013 13:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -