3 Series E46 320d (M47) SAL
Disconnect plug connection from air-mass flow sensor.
Release screws (1) and remove air-mass flow sensor.
Tightening Torque,
refer to Technical Data 13 62 7AZ.
Read out fault memory of DDE control module, check stored error
messages, rectify faults, clear fault memory.
RA Removing and installing/replacing air-mass flow sensor (M47)
BMW AG - TIS
12.02.2013 13:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -