3 Series E46 320d (M47) SAL
Installation:
Check lubrication of transmission input shaft for sticky
consistency. If grease is sticky, replace clutch plate.
Check clutch plate for friction rust in taper splines and replace
if necessary.
Mechanically remove old grease and lining abrasion from the
taper splines of the clutch disc (with a cloth).
Then apply a thin and even coat of grease with a brush in
entire area of taper groove.
Grease,
refer to BMW Service Operating Fluids.
RA Removing and installing transmission (S5D 320Z, M47)
BMW AG - TIS
12.02.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
