3 Series E46 320d (M47) TOUR
Hold engine hood, unhook damper on hood.
Slide special tool 51 2 160 over damper.
Open engine hood completely and reconnect damper with special
tool 51 2 160 to hood.
Drain and dispose of coolant.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Vent cooling system and check for leaks,
refer to 17 00 005.
Remove radiator blind,
refer to 17 11 020.
Remove pressure hose between turbocharger and intercooler.
Caution!
Fit charge air hoses without grease and dry.
If necessary, remove compressor for air conditioning (lines remain
connected).
Remove intake air manifold,
refer to 11 61 050.
Unclip vacuum line from brake booster.
Remove filter element.
Installation:
Install cleaner insert with support (1) downwards.
RA Removing and installing engine (M47)
BMW AG - TIS
12.02.2013 12:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
