3 Series E46 320d (M47) TOUR
Removal:
Removal of cylinder head is described separately from installation.
Assembly sequence for removal and installation is different.
Remove camshafts,
refer to 11 31 001.
Caution!
These screws must "not" be removed.
Remove suspension element from cylinder head.
Remove bearing pin (1) for sliding rail.
Note:
The sliding rail is guided and secured at a bearing pin and is
only removed later because of better accessibility.
RA Removing and installing cylinder head (M47)
BMW AG - TIS
12.02.2013 12:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
