3 Series E46 320d (M47TU) SAL
M47:
Crank engine at central bolt in direction of rotation until piston of
first cylinder is in "TDC position".
Secure flywheel with special tool 11 2 300 in TDC position.
M47TU2:
Crank engine at central bolt in direction of rotation until piston of
first cylinder is in "TDC position".
Secure flywheel with special tool 11 5 180 in TDC position.
Release screw (1).
Second retaining screw is located at end of return line.
Release this screw as well.
Pull locks and detach water hoses.
Pull locks (1 and 2).
Detach return pipe and water hoses.
RA Removing and installing cylinder head (M47TU / M47T2)
BMW AG - TIS
12.02.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -