3 Series E46 320d (M47TU) SAL
Release screws (1).
Lift off coolant branch flange.
Installation:
Replace seal.
Disconnect plug connection (2).
Detach fuel return line (3).
Disconnect plug connection (2) from temperature sensor.
Release union nuts (1) with special tool 13 5 020 .
Tightening torque, 13 53 8AZ
.
Disconnect all plugs (2).
Remove rubber mount (3).
Installation:
Observe installation position of rubber mount.
Important!
These screws must "not" be removed.
Release bolts (1) for timing case cover.
One bolt is lcoated in the cylinder head.
RA Removing and installing cylinder head (M47TU / M47T2)
BMW AG - TIS
12.02.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -