3 Series E46 320d (M47TU) SAL
26 11 000
Removing and installing complete propeller
shaft (three-part propeller shaft)
Special tools required:
•
26 1 040
Remove exhaust system.
Remove heat shield (1).
Release screw ring (1) several turns with special tool 26 1 040 .
Tightening torque, 26 11 3AZ.
Installation:
Tighten screw ring with special tool 26 1 040.
RA Removing and installing complete propeller shaft (three-part propeller shaft)
BMW AG - TIS
12.02.2013 16:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -