3 Series E46 320d (M47TU) TOUR
Lift off cover.
Release retaining screws on torque converter (3 screws) with
special tool 24 1 110 .
Tightening torque, 24 40 1AZ .
Installation:
Only use original bolts.
Protect torque converter from slipping out. To do so, insert special
tool 24 4 131 / 24 4 133 in opening of the transmission
housing.
Clamp torque converter.
Unfasten screws.
Tightening torque, 24 00 1AZ .
Installation:
Pay attention to installation position of exhaust mounting.
Pull off transmission from engine towards rear and lower it.
RA Removing and installing automatic transmission (A5S 390R, M47TU)
BMW AG - TIS
12.02.2013 15:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
