3 Series E46 320d (M47TU) TOUR
Installation:
Pay attention to adapter sleeves (1 and 2).
Withdraw damaged adapter sleeves from transmission housing.
Insert new adapter sleeves into engine block.
Installation:
Sheet metal flywheel is provided with three recesses for
retaining lugs of torque converter.
When joining up engine and transmission: The three retaining
lugs on the torque converter must be flush with the three
recesses on the metal flywheel.
Non-conformance leads to follow-up damage on the
automatic transmission.
Turning on the torque converter, or engine, is no longer
possible after guiding the engine and transmission together
and would lead to damage.
Installation:
Bore on driver must point to center of aperture in cover plate.
Installation:
Rotate torque converter on transmission.
Bores on lugs must point to center of bores on flywheel.
Screw special tool 24 2 300 into lug.
RA Removing and installing automatic transmission (A5S 390R, M47TU)
BMW AG - TIS
12.02.2013 15:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -