3 Series E46 320i (M54) TOUR
Installation:
Pay attention to adapter sleeves (1 and 2).
Remove damaged adapter sleeves from transmission housing
and replace.
Important!
When joining up engine and transmission, ensure ease of
movement of torque converter.
Installation:
Sheet metal flywheel is provided with three recesses for
retaining lugs of torque converter.
When the engine and the transmission are joined, the three
retaining lugs on the torque converter must be flush with the
three recesses on the sheet metal flywheel.
Failure to comply with this requirement will result in damage to
the automatic transmission!
Turning on the torque converter, or engine, is no longer
possible after guiding the engine and transmission together
and would lead to damage.
Installation:
Bore on driver must point to center of aperture in cover plate.
RA Removing and installing automatic transmission (A5S 325Z)
BMW AG - TIS
13.02.2013 07:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
