3 Series E46 320i (M54) TOUR
Drill holes for plug welding C-pillar reinforcement plate in body.
Clean connection faces of vehicle and spare part and coat with
zinc dust paint.
Insert reinforcement plate (1) approx. 30 mm in C-pillar and weld.
Prepare and fit the D-pillar reinforcement plate.
Reinforcement plate width = approx. 60 mm
Drill holes for plug welding D-pillar reinforcement plate in body.
RA Replacing rear left side wall (part replacement C- and D-pillar, top) (touring)
BMW AG - TIS
13.02.2013 12:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
