3 Series E46 325Ci (M54) COUPE
Unscrew bolt (1).
Push A-pillar retainer upwards.
Remove A-pillar retainer at rear towards front.
Installation:
Tightening torque,
refer to Technical Data 72 12 14AZ
During installation, ensure that retaining lug is correctly seated
in body.
View of retainer, A-pillar, rear
1.
Retaining bore for retaining lug of retainer, A-pillar, rear in
body
2.
Retaining lug on retainer, A-pillar, rear,
must snap into place in retaining bore
3.
Retainer, A-pillar, rear
4.
ITS head airbag
Unscrew bolt (1).
Push retainer, A-pillar, front, towards rear (2).
Remove retainer, A-pillar, towards front (3).
Installation:
Tightening torque,
refer to Technical Data 72 12 14AZ
During installation, ensure that retaining lug is correctly seated in
body.
Unclip A-pillar wiring harness from retaining lugs of A-pillar trim
holder.
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
18.02.2013 05:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -