3 Series E46 325Ci (M54) COUPE
Position of retaining clips, A-pillar trim holder.
Important!
When removing retainer, trim panel, A-pillar, it is absolutely
essential to avoid
-
damage to paintwork,
-
damage to retainer, trim panel, A-pillar,
-
damage to windshield,
-
damage to ITS head airbag!
Remove retainer, trim panel, A-pillar.
To do so, insert screwdriver (2) in area of retaining clip between A-
pillar trim holder (1) and body (3).
Carry out this procedure on all retaining clips.
Installation:
Replace all retaining clips that have been removed.
1.
retainer, trim panel, A-pillar
2.
Screwdriver
3.
Body (A-pillar)
Remove ITS head airbag.
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
18.02.2013 05:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -