3 Series E46 325i (M54) SAL
Model with seat heating only:
Lift out Omega clip (1).
Pull out cable (2) from Omega clip (1).
Model with lumbar supports:
If necessary, disconnect plug connections (3) and (4).
Lift out Omega clip (1).
Removal/replacement of backrest frame only:
Detach cover (1) on left/right.
Caution!
Do not under any circumstances turn screw underneath screw
(2), this would destroy the seat frame.
Loosen left/right screw (2).
Detach backrest frame (3) with backrest cover upwards.
Installation:
Replace screws (microencapsulated).
Tightening Torque,
refer to Technical Data 52 10 2AZ.
Note:
The operation "Removing complete backrest" ends here.
Removal of backrest cover with padding/replacement of backrest
frame only:
Remove both guides for front head restraint,
refer to 52 13 ...
RA Replacing back-rest cover for left or right front seat (normal / manual)
BMW AG - TIS
17.02.2013 17:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -