3 Series E46 325i (M54) TOUR
Remove coolant pipe.
Note:
If the coolant pipe cannot be fed out:
Release banjo bolt (1) and disconnect oil pressure line for
VANOS adjustment unit.
Installation:
Replace O-ring on coolant pipe.
If necessary, replace sealing rings on banjo bolt (1).
Tightening torque of banjo bolt (1) 11 36 2AZ
.
Removal
Removal of cylinder head is described separately from installation.
Remove double VANOS adjustment unit.
Remove camshafts with bearing strips.
Release screw connection between timing case cover and
cylinder head.
Release screws, remove chain guide.
RA Removing and installing/replacing cylinder head (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 23:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -