3 Series E46 325i (M54) TOUR
Tilt yaw sensor (1) upwards in direction (2) and remove in
direction (3).
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove yaw sensor from mounting.
Important!
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may
be malfunctions in the DSC.
Installation:
Tightening torque, 34 52 3AZ
.
RA Removing and installing/replacing DSC yaw sensor
BMW AG - TIS
14.02.2013 09:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -