3 Series E46 330Ci (M54) CONVER
Open weld seams (4) on door pillar hinges.
View from vehicle floorpan:
Open laser weld seams (1).
Open welding spots in area (2) and remove outer door pillar with
entrance cover.
On outer entrance (1), mark cutting lines (2) in center and at edge of bores (3) and cut.
Diameter of bores (3) 35 mm.
Open weld spots in area (4).
RA Replacing door pillar outer and inner sections at front left (partial replacemen
BMW AG - TIS
15.02.2013 10:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -