3 Series E46 330d (M57) TOUR
Release screws (1).
Remove acoustic cover (2).
Note:
Do not damage oil-filter cap, release and tighten with socket
only.
When the oil-filter cap is opened, the oil flows from the oil-
water heat exchanger back into the sump.
Release screw (1) on return pipe.
Release oil filter cap (2).
Remove oil filter element.
Disconnect plug (3) from oil pressure switch.
Installation:
Replace sealing rings and coat with oil.
Detach hose (1).
Unfasten screws (2).
Remove oil-filter housing together with oil-water heat exchanger
(3).
RA Removing and installing / sealing or replacing complete oil-filter housing (M57)
BMW AG - TIS
15.02.2013 09:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -