3 Series E46 330xi (M54) SAL
Unscrew screw.
Withdraw hydraulic lines (1 and 2) from transmission housing.
Installation:
Replace sealing rings on lines.
Lift out cover (behind exhaust manifold).
Release retaining screws of torque converter:
-
Rotate engine until screw appears in window
-
Release screw with special tool 24 1 110
-
Continue rotating engine until further screws appear in
window
-
Release screws with special tool 24 1 110
Tightening torque, 24 40 1AZ .
Installation:
Only use original bolts.
RA Removing and installing automatic transmission (A5S 325Z)
BMW AG - TIS
16.02.2013 09:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
