3 Series E46 M3 (S54) COUPE
Insert screws of VANOS adjustment unit and tighten down.
Note:
Check installed direction.
Install holder (4).
Insert screws (3) and secure holder (4) (do not tighten down
screws (3) yet)
Install sliding rail (2).
Insert screws (1).
Tighten down screws (1) and screws (3).
Disconnect special tool 12 6 050 and special tool 12 6 410
and remove.
Insert screw connections in solenoid valves.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S54)
BMW AG - TIS
16.02.2013 13:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -