3 Series E46 M3 (S54) COUPE
11 36 582
Replacing solenoid valve on VANOS
adjustment unit (S54)
E46 only:
Remove expansion rivets. Remove air duct (1).
Disconnect plug connection (1) on solenoid valve.
Caution!
Have a cleaning cloth ready. A small quantity of oil will
emerge after the screws have been released.
Make sure no oil runs onto belt drive. Remove any remnants
of oil immediately with cleaning cloth.
Release screws and remove solenoid valve with sealing plate.
Installation:
Replace sealing plate (1). Sealing surfaces on solenoid valve and
on VANOS adjustment unit clean and oil-free.
RA Replacing solenoid valve on VANOS adjustment unit (S54)
BMW AG - TIS
16.02.2013 13:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -