3 Series E46 M3 (S54) COUPE
12 61 280
Removing and installing/replacing oil
pressure switch (S54)
Turn off ignition.
Note:
Drain the main flow oil filter in order to prevent an excessive
discharge of oil when the oil pressure switch is removed.
This operation is described in the section "BMW engine oil service
incl. supplementary service".
Remove intake air manifold.
Unlock plug (1) and detach from oil pressure switch (2).
Unscrew oil pressure switch (1).
Tightening torque, 12 61 1AZ..
RA Removing and installing/replacing oil pressure switch (S54)
BMW AG - TIS
16.02.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -