bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Level Switch For Engine Oil (M62, M54, S54, M56) > < 1 RA Removing And Installing_replacing Oil Pressure Switch (S54)
Page 2
background image

Note:

Assemble car and set in horizontal position.

Start engine and run at idle until oil indicator lamp goes out.

Switch off engine and wait approx. 5 minutes.

Then check engine oil level.

Top up engine oil if necessary.

RA  Removing and installing/replacing oil pressure switch (S54)

BMW AG - TIS

16.02.2013  13:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Replacing Level Switch For Engine Oil (M62, M54, S54, M56) > < 1 RA Removing And Installing_replacing Oil Pressure Switch (S54)